General Specifications

THE MOST UNIVERSAL OF ALL THERMOPLASTIC TUBING

This formulation for flexible premium tubing is the standard for both general, industrial, and automotive applications.  Its broad temperature range (-60° F. to +200° F. continuous, please see chart for the loss of burst resistance with the temperature increase) combined with light weight, long fatigue resistance, dimensional stability, excellent abrasion resistance, low moisture absorption, and flexibility make it the most universal of all thermoplastic tubing.

Applications:

Pneumatics Hydraulic Vacuum Petrochemicals	General Chemicals Gasses Machine Tools Oils	Coolant Fuel Lubricants Fresh & Salt Water
N11 Tubing is not recommended for drinking water

Hardness:

N11 Nylon Tubing (N11) Hardness Rating:
72 SHORE D (ASTM D 785)

Temperature Range:

N11 Nylon Tubing (N11) Temperature Rating:
Minimum: -60°F - Maximum: 200°F.
Minimum: -51°C - Maximum: 93°C.

Mazzer N11 Tubing Chemical Compatibility Chart:

The information given in this chart should be used only as a guide.  Our laboratory testing cannot possibly duplicate all combinations of environmental factors or conditions present during applied service.  We also strongly recommend that you refer to the raw material manufacturer's or supplier's Web site or other reference materials for more information.

Excellent Chemical Compatibility:

Acetate Solvents Acetone Acetylene Alum Aluminum Chloride Ammonia Gas Ammonium Chloride Ammonium Nitrate Barium Chloride Borax Butane Butilic Alcohol Butyl Acetate Calcium Hydroxide Carbonic Acid Carbonic Dioxide Carbonic Oxide Citric Acid Cyanide Diesel Fuel Ether

Ethyl Alcohol Ethyl Chloride Formaldehyde Freon 12-22-502 Gas Oil Gasoline Glucose Glycerin Glycol Hydraulic Oil Hydrogen Iron Cholrine Kerosene Lactid Acid LPG (Liquid Gas) Lubricating Oils Magnesium Chloride Mercuric Cholride Mercury Mineral Oil Naphtha

Natural Gas Nickel Chloride Nitrogen Oleic Acid Oxygen Ozone (Cold) Paints Petroleum (Raw) Potassium Chloride Potassium Cyanide Propane Sodium Bisulphate Sodium Chloride Sodium Nitrate Sulphides Sulphuric Hydrogen Toluene (Toluol) Xylene Zinc Chloride

Limited Chemical Compatibility:

Acetic Acid (10%) Ammonia Liquid Amyl Acetate Benzene (Benzol)

Boric Acid Ethanol Ethyl Acetate Formic Acid

Methylic Moisture Trichlorethylene

Unsuitable For Use With:

Benzene Chloride Chloro Gas

Chromic Acid Nitric Acid

Phenol Sulphuric Chloride

Size Chart - N11 Tubing Fractional Sizes:

Ref. Size	O.D. Nom. In.	I.D. Nom. In.	Wall Thickness Nom. In.	Min Bend Radius In.	O.D. Tol. In.	I.D. Tol. In.	Min. Burst Pressure (PSI @ 75°F.)
N11 2	1/8	.080	0.023	.70	+.002 -.0045	+/- .004	1000
Available Lengths: 100'  500'  1000'  2000'  3000'  5000'  (Feet)
N11 2.5	5/32	.106	0.025	.94	+.002 -.0045	+/- .004	1000
Available Lengths: 100'  500'  1000'  2000'  3000'  5000'  (Feet)
N11 3	3/16	.118	0.035	1.1	+.002 -.0055	+/- .004	1000
Available Lengths: 100'  500'  1000'  2000'  3000'  5000'  (Feet)
N11 4	1/4	.180	0.035	1.5	+.002 -.0055	+/- .004	1000
Available Lengths: 100'  500'  1000'  2000'  (Feet)
N11 417	1/4	.170	0.040	1.5	+.002 -.0055	+/- .004	1200
Available Lengths: 100'  500'  1000'  2000'  (Feet)
N11 462	1/4	.126	0.062	1.5	+.002 -.0055	+/- .004	2000
Available Lengths: 100'  500'  1000'  2000'  (Feet)
N11 5	5/16	.233	0.040	1.85	+.002 -.0055	+/- .004	1000
Available Lengths: 100'  500'  1000'  (Feet)
N11 6	3/8	.275	0.050	2.25	+.002 -.0055	+/- .004	1000
Available Lengths: 100'  500'  1000'  (Feet)
N11 8	1/2	.375	0.063	3	+.002 -.0055	+/- .004	1000
Available Lengths: 100'  500'  (Feet)
N11 10	5/8	.500	0.063	3.75	+/- .004	+/- .004	600
Available Lengths: 100'  (Feet)
N11 12	3/4	.560	0.095	4.5	+/- .004	+/- .004	790
Available Lengths: 100'  (Feet)
N11 16	1	.750	0.125	6	+/- .006	+/- .006	790
Available Lengths: 100'  (Feet)

NOTES:  1) The specified minimum bend radius is for minimal tube flattening.  2) The safety factor adopted sets the minimum bursting pressure at four (4) times the working pressure.  Please remember that the bursting and working pressure data listed are determined at 75°F. (24° Celsius)

Size Chart - N11 Tubing Metric Sizes:

Ref. Size	O.D. Nom. mm.	I.D. Nom. mm.	Wall Thickness Nom. mm.	Min Bend Radius mm.	O.D. Tol. mm.	I.D. Tol. mm.	Min. Burst Pressure (bar/PSI @ 75°F.)
N11 0427	4	2.7	0.65	24	+.05 -.1	+/- .1	75 / 1086
Available Lengths: 25M  150M  300M  500M  1000M  1500M  (Meters)
N11 0402	4	2	1.00	24	+.05 -.1	+/- .1	135 / 1956
Available Lengths: 25M  150M  300M  500M  1000M  1500M  (Meters)
N11 0533	5	3.3	0.85	30	+.05 -.1	+/- .1	70 / 1015
Available Lengths: 25M  150M  300M  500M  1000M  1500M  (Meters)
N11 0604	6	4	1.00	36	+.05 -.1	+/- .1	85 / 1233
Available Lengths: 25M  150M  300M  500M  1000M  (Meters)
N11 0806	8	6	1.00	48	+.05 -.1	+/- .1	58 / 841
Available Lengths: 25M  150M  300M  (Meters)
N11 0855	8	5.5	1.25	50	+.05 -.1	+/- .1	74 / 1073
Available Lengths: 25M  150M  300M  500M  (Meters)
N11 1008	10	8	1.00	60	+.05 -.1	+/- .1	42 / 609
Available Lengths: 25M  300M  150M  (Meters)
N11 1075	10	7.5	1.25	70	+.05 -.1	+/- .1	57 / 827
Available Lengths: 25M  300M  150M  (Meters)
N11 1210	12	10	1.00	75	+.05 -.1	+/- .1	32 / 464
Available Lengths: 25M  150M  300M  (Meters)
N11 1209	12	9	1.50	84	+.05 -.1	+/- .1	63 / 914
Available Lengths: 25M  150M  300M  (Meters)
N11 1412	14	12	1.00	98	+.05 -.1	+/- .1	27 / 392
Available Lengths: 25M  (Meters)
N11 1512	15	12	1.50	105	+/- .1	+/- .1	48 / 696
Available Lengths: 25M  (Meters)
N11 1613	16	13	1.50	112	+/- .1	+/- .1	44 / 638
Available Lengths: 25M  (Meters)

NOTES:  1) The specified minimum bend radius is for minimal tube flattening.  2) The safety factor adopted sets the minimum bursting pressure at four (4) times the working pressure.  Please remember that the bursting and working pressure data listed are determined at 75°F. (24° Celsius)