PNEUMATIC TOOL HOSE
Manufactured to Mazzer's exacting standards of quality nylon, this preformed tubing is used with pneumatic tools. It is available with variety of fittings. This tubing has all the advantages of regular straight Nylon tubing with the added advantage of being self-storing and retractable. These characteristics make an excellent choice for tool drop lines, general shop use, and many applications in the machine tool, laboratory, electronic, and instrumentation industries. When manufactured with fittings that insert in to the I.D., these coils are often referred to as "recoil hose."
Characteristics:
- Chemical resistant
- Nylon for toughness
| - Dimensional accuracy
- Self-storing
|
Hardness:
N1120 Nylon I.D. Recoil Hose Hardness Rating:
72 SHORE D (ASTM D 785)
Temperature Range:
N1120 Nylon I.D. Recoil Hose Temperature Rating:
Minimum: 0°F - Maximum: 0°F.
Minimum: -18°C - Maximum: -18°C.
Mazzer Nylon I.D. Recoil Hose / O.D. Recoil Tubing
Chemical Compatibility Chart:
The information given in this chart should be used only as a guide. Our laboratory testing cannot possibly duplicate all combinations of environmental factors or conditions present during applied service. We also strongly recommend that you refer to the raw material manufacturer's or supplier's Web site or other reference materials for more information.
Excellent Chemical Compatibility:
| Acetate Solvents | | Acetone | | Acetylene | | Alum | | Aluminum Chloride | | Ammonia Gas | | Ammonium Chloride | | Ammonium Nitrate | | Barium Chloride | | Borax | | Butane | | Butilic Alcohol | | Butyl Acetate | | Calcium Hydroxide | | Carbonic Acid | | Carbonic Dioxide | | Carbonic Oxide | | Citric Acid | | Cyanide | | Diesel Fuel | | Ether |
| | Ethyl Alcohol | | Ethyl Chloride | | Formaldehyde | | Freon 12-22-502 | | Gas Oil | | Gasoline | | Glucose | | Glycerin | | Glycol | | Hydraulic Oil | | Hydrogen | | Iron Cholrine | | Kerosene | | Lactid Acid | | LPG (Liquid Gas) | | Lubricating Oils | | Magnesium Chloride | | Mercuric Cholride | | Mercury | | Mineral Oil | | Naphtha |
| | Natural Gas | | Nickel Chloride | | Nitrogen | | Oleic Acid | | Oxygen | | Ozone (Cold) | | Paints | | Petroleum (Raw) | | Potassium Chloride | | Potassium Cyanide | | Propane | | Sodium Bisulphate | | Sodium Chloride | | Sodium Nitrate | | Sulphides | | Sulphuric Hydrogen | | Toluene (Toluol) | | Xylene | | Zinc Chloride |
|
Limited Chemical Compatibility:
| Acetic Acid (10%) | | Ammonia Liquid | | Amyl Acetate | | Benzene (Benzol) |
| | Boric Acid | | Ethanol | | Ethyl Acetate | | Formic Acid |
| | Methylic | | Moisture | | Trichlorethylene |
|
Unsuitable For Use With:
| Benzene Chloride | | Chloro Gas |
| | |
Size Chart - Nylon I.D. Recoil Hose:
| Ref. Size | I.D. Nom. In. | O.D. Nom. In. | Wall Thickness Nom. In. | Coil O.D. Nom. In. | Number
of Coils | Weight in Pounds | Min. Burst Pressure
(PSI @ 75°F.) |
|---|
| N1120 2A | 1/8 | .171 | 0.023 | 2.62 | 156 | 0.51 | 1300 |
Available Lengths: 100' (Feet)
|
| N1120 2.5A | 5/32 | .206 | 0.025 | 2.82 | 146 | 0.68 | 1115 |
Available Lengths: 100' (Feet)
|
| N1120 3A | 3/16 | .237 | 0.025 | 3.15 | 131 | 0.79 | 1000 |
Available Lengths: 100' (Feet)
|
| N1120 4A | 1/4 | .320 | 0.035 | 3.40 | 124 | 1.49 | 955 |
Available Lengths: 100' (Feet)
|
| N1120 5A | 5/16 | .393 | 0.040 | 4.50 | 93 | 2.1 | 835 |
Available Lengths: 100' (Feet)
|
| N1120 6A | 3/8 | .475 | 0.050 | 5.60 | 75 | 3.18 | 895 |
Available Lengths: 100' (Feet)
|
| N1120 8A | 1/2 | .625 | 0.063 | 6.77 | 62 | 5.26 | 820 |
Available Lengths: 100' (Feet)
|
NOTES: 1) The safety factor adopted sets the minimum bursting pressure at four (4) times the working pressure. Please remember that the bursting and working pressure data listed are determined at 75°F. (24° Celsius)
Size Chart - Nylon O.D. Recoil Tubing:
| Ref. Size | O.D. Nom. In. | I.D. Nom. In. | Wall Thickness Nom. In. | Coil O.D. Nom. In. | Number
of Coils | Weight in Pounds | Min. Burst Pressure
(bar/PSI @ 75°F.) |
|---|
| N1122 2A | 1/8 | .080 | 0.023 | 1.85 | 221 | 0.34 | 90 / 1300 |
Available Lengths: 100M (Feet)
|
| N1122 2.5A | 5/32 | .106 | 0.025 | 1.89 | 220 | 0.49 | 77 / 1115 |
Available Lengths: 100M (Feet)
|
| N1122 3A | 3/16 | .118 | 0.035 | 2.50 | 165 | 0.79 | 69 / 1000 |
Available Lengths: 100M (Feet)
|
| N1122 4A | 1/4 | .180 | 0.035 | 2.87 | 146 | 1.12 | 66 / 955 |
Available Lengths: 100M (Feet)
|
| N1122 5A | 5/16 | .233 | 0.040 | 3.38 | 125 | 1.62 | 58 / 835 |
Available Lengths: 100M (Feet)
|
| N1122 6A | 3/8 | .275 | 0.050 | 4.3 | 97 | 2.42 | 62 / 895 |
Available Lengths: 100M (Feet)
|
| N1122 8A | 1/2 | .375 | 0.063 | 5.7 | 73 | 4.07 | 57 / 820 |
Available Lengths: 100M (Feet)
|
NOTES: 1) The safety factor adopted sets the minimum bursting pressure at four (4) times the working pressure. Please remember that the bursting and working pressure data listed are determined at 75°F. (24° Celsius)
