THE STRENGTH OF NYLON AND THE FLEXIBILITY OF POLYURETHANE
Mazzer Industries, Inc., one of the most technically advanced extrusion companies in the world, has developed leading-edge technology to manufacture multi-layer tubing. This method of extrusion enables Mazzer to combine several materials into one product, taking advantage of the mechanical and chemical properties of each. NYLO-THANE is a special co-extruded hose that features a unique multi-layer construction of a Polyurethane layer bonded to an inner layer of Nylon. The resulting product is designed to offer the benefits of both materials in one hose.
Characteristics:
- Cost effective
- Excellent memory
| - 200 PSI working pressure
- Abrasion resistant
| - Light weight
- Chemical resistant
|
Hardness:
UN20 Nylo-Thane 100-Foot Bulk Length Hardness Rating:
Temperature Range:
UN20 Nylo-Thane 100-Foot Bulk Length Temperature Rating:
Minimum: -40°F - Maximum: 175°F.
Minimum: -40°C - Maximum: 79°C.
Mazzer Nylo-Thane Recoil Tubing
Chemical Compatibility Chart:
The information given in this chart should be used only as a guide. Our laboratory testing cannot possibly duplicate all combinations of environmental factors or conditions present during applied service. We also strongly recommend that you refer to the raw material manufacturer's or supplier's Web site or other reference materials for more information.
Excellent Chemical Compatibility:
| Acetate Solvents | | Acetone | | Acetylene | | Alum | | Aluminum Chloride | | Ammonia Gas | | Ammonium Chloride | | Ammonium Nitrate | | Barium Chloride | | Borax | | Butane | | Butilic Alcohol | | Butyl Acetate | | Calcium Hydroxide | | Carbonic Acid | | Carbonic Dioxide | | Carbonic Oxide | | Citric Acid | | Cyanide | | Diesel Fuel | | Ether |
| | Ethyl Alcohol | | Ethyl Chloride | | Formaldehyde | | Freon 12-22-502 | | Gas Oil | | Gasoline | | Glucose | | Glycerin | | Glycol | | Hydraulic Oil | | Hydrogen | | Iron Cholrine | | Kerosene | | Lactid Acid | | LPG (Liquid Gas) | | Lubricating Oils | | Magnesium Chloride | | Mercuric Cholride | | Mercury | | Mineral Oil | | Naphtha |
| | Natural Gas | | Nickel Chloride | | Nitrogen | | Oleic Acid | | Oxygen | | Ozone (Cold) | | Paints | | Petroleum (Raw) | | Potassium Chloride | | Potassium Cyanide | | Propane | | Sodium Bisulphate | | Sodium Chloride | | Sodium Nitrate | | Sulphides | | Sulphuric Hydrogen | | Toluene (Toluol) | | Xylene | | Zinc Chloride |
|
Limited Chemical Compatibility:
| Acetic Acid (10%) | | Ammonia Liquid | | Amyl Acetate | | Benzene (Benzol) |
| | Boric Acid | | Ethanol | | Ethyl Acetate | | Formic Acid |
| | Methylic | | Moisture | | Trichlorethylene |
|
Unsuitable For Use With:
| Benzene Chloride | | Chloro Gas |
| | |
Size Chart - Nylo-Thane Recoil Tubing:
| Ref. Size | I.D. Nom. In. | O.D. Nom. In. | Wall Thickness Nom. In. | Coil O.D. Nom. In. | Number
of Coils | Weight in Pounds | Min. Burst Pressure
(PSI @ 75°F.) |
|---|
| UN20 4A | 1/4 | .33 | 0.040 | 3.4 | 120 | 1.7 | 800 |
Available Lengths: 100' (Feet)
|
| UN20 6A | 3.8 | .455 | -1.672 | 5.6 | 76 | 4.2 | 800 |
Available Lengths: 100' (Feet)
|
NOTES: 1) The safety factor adopted sets the minimum bursting pressure at four (4) times the working pressure. Please remember that the bursting and working pressure data listed are determined at 75°F. (24° Celsius)
Size Chart - Nylon O.D. Recoil Tubing:
| Ref. Size | O.D. Nom. In. | I.D. Nom. In. | Wall Thickness Nom. In. | Coil O.D. Nom. In. | Number
of Coils | Weight in Pounds | Min. Burst Pressure
(bar/PSI @ 75°F.) |
|---|
| N1122 2A | 1/8 | .080 | 0.023 | 1.85 | 225 | 0.34 | 90 / 1300 |
Available Lengths: 100M (Feet)
|
| N1122 2.5A | 5/32 | .106 | 0.025 | 1.89 | 200 | 0.49 | 77 / 1115 |
Available Lengths: 100M (Feet)
|
| N1122 3A | 3/16 | .118 | 0.035 | 2.50 | 150 | 0.79 | 69 / 1000 |
Available Lengths: 100M (Feet)
|
| N1122 4A | 1/4 | .180 | 0.035 | 2.87 | 146 | 1.12 | 66 / 955 |
Available Lengths: 100M (Feet)
|
| N1122 5A | 5/16 | .233 | 0.040 | 3.38 | 125 | 1.62 | 58 / 835 |
Available Lengths: 100M (Feet)
|
| N1122 6A | 3/8 | .275 | 0.050 | 4.3 | 98 | 2.42 | 62 / 895 |
Available Lengths: 100M (Feet)
|
| N1122 8A | 1/2 | .375 | 0.063 | 5.7 | 73 | 4.07 | 57 / 820 |
Available Lengths: 100M (Feet)
|
NOTES: 1) The safety factor adopted sets the minimum bursting pressure at four (4) times the working pressure. Please remember that the bursting and working pressure data listed are determined at 75°F. (24° Celsius)
